EasyN F Series User manual - Manual (Page 16)

English EasyN IP Camera User Manual
www.easyn.com MFE-E-A3
15
DNS server, Http port;
3.4.6. Wireless LAN Settings
There are 5 security modes regarding to the wireless networking setting: None,
WEP, WPA Personal（TKIP, WPA Personal（AES）, WPA2 Personal（AES） and
WAP2 （TKIP+AES）.
Note:
1. To connect the internet through a wireless network, the camera SSID number must
be the same with the wireless router and the SSID number of other AP device(s),
2. Our default camera SSID number is ‘dink’.
3.4.7. ADSL Settings
When the IP camera needs to be connected to ADSL directly, just check the ADSL
box to run, then enter the ADSL user name and ADSL password which are provided
by the ISP (network suppliers), and click ‘submit’ to save;
3.4.8. UPnP Settings
The full name of UPnP is Universal Plug and Play, which is Plug_and_play. It is the
same as automatic port forwarding.
Router must support this function in other for it to work. Check on it and press submit
to allow this function.