EasyN F Series User manual - Manual (Page 10)

English EasyN IP Camera User Manual
www.easyn.com MFE-E-A3
9
3.2. Logging and Active X Installation
Before IE monitoring through the web, it is necessary to install a video plug-in,
there are 2 kinds of installation mode as shown below:
1. Open disk, file, double click inner and process
installation. The installation process is shown as below:
a. Click ‘next’ to continue
b. Click ‘finish’.
Before external net visit IP camera, port forwarding is necessary in the
router , for more detail please refer to “ Port Forwarding Settings in router “in
8.1 sections.
Note：
1. Device information indicates IP camera information.
2. When the current computer has a fixed IP, (namely non-DHCP IP), and
the IP camera is used for the first time, please click automatic setup, so
the IP address of the IP camera, gateway and DNS can be the same with
the PC.
3. If you need to manually modify the camera name, HTTP interface,
IP address, sub-net mask, gateway, main DNS server, backup DNS
server, etc. please click apply after the modification, and then enter
IP camera username and password. Click confirm after that.