EasyN F Series User manual - Manual (Page 14)

English EasyN IP Camera User Manual
www.easyn.com MFE-E-A3
13
1）the right interface will indicate
the parameter setting operation is successful, please
click OK then refresh.
2) the right interface will indicate the parameter
setting operation is successful, and need to reboot the IP camera
to finish the setting, please click OK.
Click yes (Y) to restart.
3.4.1. Device Information
The device information includes the above interfaces, device serial number
（MAC） 、
device system firmware version, device application firmware version.
3.4.2. Device Name Settings
The table here displays camera name, which is on the search bar and for the
setting of multiple channels equipment, etc.