WIKA DI30 User Manual
Page 29
6 Commissoning, operation
WIKA operating instructions digital indicator model DI30
29
PN100 to PN110: Linearisation
Through linearisation, the user has the possibility to linearise a non-linear
sensor signal.
A detailed description can be found in the chapter on Sensor linearisation.
Under PN100, the desired number of additional set points can be released.
Only after changing the number are they accessible via the configuration
PN101 to max. PN110. If PN100 = 0, then no PN101 will be displayed. To
monitor the desired linearisation, all the set points should first be
parameterised, otherwise there may be deviations from the desired value in
the display!
PN200: Serial number
Under PN200 the 4-digit serial number can be called up, that allows allocation
to the production process and the manufacturing procedure. This parameter
can only be viewed.