WIKA DI30 - Manual (Page 19)

6 Commissoning, operation
WIKA operating instructions digital indicator model DI30 19
6.3 Function and operation description
6.3.1 Operation
The DI30 has 4 keys ([P], [  ], [  ], [O]), with which you can parameterise
and call up various functions during operation.
Additionally it has a 4-digit 7-segment display and two LEDs for displaying the
alarm contacts.
Name Description
1 Program key [P] With the program key, you can call up the
programming mode or perform various functions
in the programming mode.
2 DOWN key [
▼]
With the DOWN (decrease) key, you can call up
the MIN memory or alter parameters in the
programming mode.
3 UP key [
▲]
With the UP (increase) key, you can call up the
MAX memory or alter parameters in the
programming mode.
4 Zero key [O] Zero key for TARA and HOLD function
5 7-segment display In the 7-segment display measuring values are
displayed, respectively, during programming, the
program numbers or parameters are displayed.
6+7 Alarm displays The alarm display indicates the state of the relays
of the alarm outputs. If a relay is switched, the
LED lights up..