WIKA LSO.25 - Manual (Page 4)

4 WIKA operating instructions models LSO.06, LSO.25
13334603.01 09/2010 GB/D/F/E
1. General information
GB
1. General information
■ The instruments described in the operating instructions has been manufactured using
state-of-the-art technology.
All components are subject to stringent quality and environmental criteria during
production. Our management systems are certified to ISO 9001 and ISO 14001.
■ These operating instructions contain important information on handling the instrument.
Working safely requires that all safety instructions and work instructions are observed.
■ Observe the relevant local accident prevention regulations and general safety
regulations for the instrument's range of use.
■ The operating instructions are part of the instrument and must be kept in the immediate
vicinity of the instrument and readily accessible to skilled personnel at any time.
■ Skilled personnel must have carefully read and understood the operating instructions,
prior to beginning any work.
■ The manufacturer‘s liability is void in the case of any damage caused by using the
product contrary to its intended use, non-compliance with these operating instructions,
assignment of insufficiently qualified skilled personnel or unauthorised modifications to
the instrument
■ The general terms and conditions, contained in the sales documentation, shall apply.
■ Subject to technical modifications.
■ Further information:
- Internet address: www.wika.de / www.wika.com
- Relevant data sheet: LM 31.10, LM 31.20
- Application consultant: Tel.: (+49) 9372/132-0
Fax: (+49) 9372/132-406
E-Mail: [email protected]
Explanation of symbols
WARNING!
... indicates a potentially dangerous situation, which can result in serious
injury or death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation, which can result in light
injuries or damage to equipment or the environment, if not avoided.