WIKA 54_twintemp - Manual (Page 6)

GB
14004105.01 05/2011 GB/D/F/E
6 WIKA operating instructions model 54, Twin-Temp
2. Safety
WARNING!
Before installation, commissioning and operation, ensure
that the appropriate bimetal thermometer has been
selected in terms of measuring range, design and specific
measuring conditions. The compatibility of the wetted
parts of the process connection (thermowell, thermowell
stem) with the medium must be tested.
Non-observance can result in serious injury and/or
damage to the equipment.
Further important safety instructions can be found in the
individual chapters of these operating instructions.
2.1 Intended use
The combined bimetal thermometer is mainly used in the process
industry to monitor process temperatures.
The combined bimetal thermometer has been designed and built
solely for the intended use described here, and may only be used
accordingly.
The technical specifications contained in these operating instructions
must be observed. Improper handling or operation of the combined
bimetal thermometer outside of its technical specifications requires
the instrument to be taken out of service immediately and inspected
by an authorised WIKA service engineer.
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.
2. Safety