WIKA 532.54 - Manual (Page 4)

GB
4
11554810.02 11/2013 GB/D/F/E
WIKA operating instructions pressure gauge model 5 per ATEX
1. General information
■ The absolute pressure gauge described in the operating instructions has been
designed and manufactured using state-of-the-art technology. All components
are subject to stringent quality and environmental criteria during production.
Our management systems are certified to ISO 9001 and ISO 14001.
■ These operating instructions contain important information on handling the
instrument. Working safely requires that all safety instructions and work
instructions are observed.
■ Observe the relevant local accident prevention regulations and general safety
regulations for the instrument's range of use.
■ The operating instructions are part of the product and must be kept in the
immediate vicinity of the instrument and readily accessible to skilled personnel
at any time.
■ Skilled personnel must have carefully read and understood the operating
instructions prior to beginning any work.
■ The manufacturer's liability is void in the case of any damage caused by
using the product contrary to its intended use, non-compliance with these
operating instructions, assignment of insufficiently qualified skilled personnel
or unauthorised modifications to the instrument.
■ The general terms and conditions contained in the sales documentation shall
apply.
■ Subject to technical modifications.
■ Further information:
- Internet address: www.wika.de / www.wika.com
- Relevant data sheet: PM 05.02
1. General information
Explanation of symbols
WARNING!
... indicates a potentially dangerous situation that can result in
serious injury or death, if not avoided.
Information
... points out useful tips, recommendations and information for
efficient and trouble-free operation.