WIKA MG-1 - Manual (Page 4)

4 WIKA operating instructions pressure transmitter, model MG-1
11609681.02 03/2013 GB/D/F/E
GB
1. General information
1. General information
■ The pressure transmitter described in the operating instructions has been designed and
manufactured by state-of-the-art technology. All components are subject to stringent quality
and environmental criteria during production. Our management systems are certified to
ISO 9001 and ISO 14001.
■ These operating instructions contain important information on handling the pressure
transmitter. Working safely requires that all safety instructions and work instructions are
observed.
■ Observe the relevant local accident prevention regulations and general safety regulations for
the pressure transmitter's range of use.
■ The operating instructions are part of the product and must be kept in the immediate vicinity of
the pressure transmitter and readily accessible to skilled personnel at any time.
■ Skilled personnel must have carefully read and understood the operating instructions prior to
beginning any work.
■ The manufacturer's liability is void in the case of any damage caused by using the product
contrary to its intended use, non-compliance with these operating instructions, assignment
of insufficiently qualified skilled personnel or unauthorised modifications to the pressure
transmitter.
■ The general terms and conditions contained in the sales documentation shall apply.
■ Subject to technical modifications.
■ Further information:
- Internet address: www.wika.com
- Relevant data sheet: PE 81.44
- Application consultant: Tel.: (+49) 9372/132-8976
E-Mail: [email protected]