WIKA A2G-50 User Manual

Page 9

WIKA operating instructions air2guide model A2G-50

40202780.02 05/2012 GB/D/F/E/I

5. Transport, packaging and storage

5.1 Transport

Check the differential pressure transmitter for any damage that may

have been caused during transportation. Obvious damage must be

reported immediately.

5.2 Packaging

Do not remove packaging until just before mounting.

Keep the packaging as it will provide optimum protection during trans-

port (e.g. change in installation site, sending for repair).

5.3 Storage
Permissible conditions at the place of storage:

Storage temperature: -20 ... +70 °C

Protect the instruments from moisture and dust.

6. Commissioning, operation

Installation and mechanical connection

■

Protect measuring instruments from contamination, high temperature

changes and vibrations

■

In order to avoid any additional heating, the instruments must not be

exposed to direct solar irradiation while in operation.

■

The differential pressure transmitter must be screw-fitted on a

suitable vertical surface. The instrument has to be mounted horizon-

tally using the enclosed mounting screws.

5. Transport, packaging ... / 6. Commissioning, operation