Kramer Electronics TP-45EDID - Manual (Page 7)

4 TP-45EDID - Overview
3 Overview
The TP
−45EDID is a high−performance twisted pair transmitter for computer
graphics or component video and unbalanced stereo audio signals. It converts the
input signals to a twisted pair signal and transmits them over CAT 5 cable to a
compatible receiver.
The TP-45EDID has two SELECT buttons that let you choose the video signal
input (XGA or component) as well as the audio input (digital or analog signal).
(The term XGA used throughout this manual implies resolutions exceeding
UXGA.) By selecting the required video input signal, the TP-45EDID with the
TP-46N can constitute either a component video (Y, C B /P B , C R /P R ) or an XGA
video – audio transmitter / receiver system:
The TP-45EDID does not convert the video signal format. Thus computer graphics sources
must be routed to computer graphics outputs. Similarly, component video sources must be
routed to component video outputs.
•
If XGA is selected, the TP-45EDID receives an XGA and audio signal and
transmits it over the CAT 5 cable to the XGA output on the TP-46N receiver
•
If component video is selected, the component video signal is transmitted
over the CAT 5 cable to the COMP outputs on the TP-46N receiver
•
The analog audio or S/PDIF (digital audio)—as selected via the audio
SELECT button—is transmitted together with the video signal over the CAT
5 cable to the TP-46N receiver
•
The TP-45EDID can execute these control functions also remotely using
simple pushbuttons (see Section 5.3 )
The audio signal is distributed simultaneously to the analog or digital audio
outputs.
The TP-45EDID Component/XGA – Audio Transmitter features:
•
Transmission range of more than 300ft (more than 100m)
•
YUV input (also known as Y, Cb, Cr, or Y, B-Y, R-Y, or Y, Pb, Pr) on 3 RCA
connectors and a computer graphics input on a 15-pin HD (F) connector
•
Digital audio input (S/PDIF) on an RCA connector and a stereo analog input
on a 3.5mm mini jack