Kramer Electronics WP-501 - Manual (Page 11)

WP-501 - Using Your WP-501 9
9
5.2 Connecting the WP-501
To connect the WP-501, as illustrated in the example in Figure 5 (front panel) and
Figure 6 (rear panel), do the following:
1. On the front panel, connect:
 A computer graphics source and the audio source of the computer to the
PC 1 15-pin HD and 3.5mm mini jack, respectively
 A microphone to the MIC IN 3.5mm mini jack (see Section 5.2.1 )
Figure 5: Connecting the WP-501 Front Panel
2. On the rear panel, connect:
 A computer graphics source and the audio source of the computer to the
PC 2 IN and AUDIO IN 2 terminal block connectors, respectively
 A composite video source (for example, a DVD player) and the audio
source of that composite video source to the rear panel AUDIO/VIDEO
IN Terminal block connectors, respectively