4 your rc-7lc / rc-7lce – Kramer Electronics RC-7LC User Manual

Page 6

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Your RC-7LC / RC-7LCE

4 Your RC-7LC / RC-7LCE

This section defines the:

Front panel of the

RC-7LC (see section 4.1)

Front panel of the

RC-7LCE (see section 4.2)

Side panel of the

RC-7LC and RC-7LCE (see section 4.3)

4.1 Defining the RC-7LC Front Panel

Figure 1 and Table 2 define the

RC-7LC front panel:

Figure 1: RC-7LC Front Panel

Table 1: RC-7LC Front Panel

# Feature

Function

1 Configurable

Control Buttons (2)

Macro Buttons for

controlling the room

and the A/V

equipment

2 Mounting holes (2) For fastening the

controller in place

3 Faceplate

Attachment Holes

(2)

For attaching the

faceplate to the

controller

CONFIG

Port

Used for

Windows®-based

configuration software

(driver downloads,

firmware updates and

so on)

SIGNAL SOURCES

Buttons

Select the input

source (from 1 to 3)

6 IR IN

Receiver

Accepts IR remote

commands (for the IR-

learner feature)

VOLUME

Control

Knob

Rotate

to remotely

adjust the volume on

the power amplifier

1 These screws should not be removed during or after mounting
2 Via the front panel, without having to remove the RC-7LC from its mounting
3 Letting you configure the RC-7LC directly from the remote transmitter without the need for software
4 In a clockwise direction to increase the volume; in a counter-clockwise direction to decrease the volume