Kramer Electronics RC-7LC User Manual

Page 11

Using Your Media / Room Controller

The example in Figure 6 shows a rear view perspective of a typical

RC-7LCE configuration. It connects to the power amplifier directly, and to

the projector via RS-232, as well as to two relay items (a screen and a

lighting system). Each source—the PC, DVD and VCR—connects to the

dedicated video and audio inputs of the projector, and the projector connects

to the power amplifier:

Figure 6: RC-7LCE (Rear Perspective) Configuration

Figure 7 shows the

RC-7LCE built into a podium in an auditorium with an

overhead projector and screen, speakers, lights, and a cabinet with a VCR, a

DVD and an amplifier inside, all controlled via the

RC-7LCE. The

presenter’s laptop is located on the podium, next to the

RC-7LCE. It is also

controlled by the

RC-7LCE and is used for presentations and slide shows.