Kramer Electronics RC-76M - Manual (Page 3)

RC-76M/ RC-712M – Contents i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 3
2.3 Recycling Kramer Products 3
3 Overview 4
3.1 Defining the RC-76M/RC-712M Room Controllers 5
4 Installing the RC-76M/RC-712M 8
4.1 Configuring the Room Controller Buttons 8
4.2 Mounting the Device 8
4.3 Connecting the Ethernet Port 11
4.4 Connecting the K-NET Port 12
4.5 Mounting the RC-76M/RC-712M onto the Merten Housing 12
5 Operating the RC-76M/RC-712M 16
6 Front Panel Button Labels 17
7 Technical Specifications 20
Figures
Figure 1: RC-76M/RC-712M Room Controller – Front Panel 5
Figure 2: RC-76M/RC-712M Room Controllers – Rear Panel 6
Figure 3: Merten Compatible Housing 9
Figure 4: Connecting the RC-712M 10
Figure 5: K-NET PINOUT Connection 12
Figure 6: Inserting the RC-76M/RC-712M 12
Figure 7: Securing the RC-76M/RC-712M 13
Figure 8: Placing the Frame 13
Figure 9: Button Cap Orientation with Label 14
Figure 10: Placing the Button Caps and Mounting the Device 14
Figure 11: Placing the Faceplates 15
Figure 12: Securing the Frame and Faceplates 15
Figure 13: Sample Button Label Sheet 19