Kramer Electronics RC-2C - Manual (Page 7)

Your RC-2C/RC-2
5
Figure 3 and Table 2 define the RC-2 rear panel:
Figure 3: RC-2 Rear Panel
Table 2: Features and Functions of the RC-2
# Feature Function
1 RC-2 Front Panel Front panel, including two control buttons
2 PROGRAM ENABLE Switch For technical support use only
3 GND PIN Connects (-) to the Ground
+12V PIN Connects (+) to the connector for powering the unit
4 RS-232 Terminal Block
Connector
Connect to the RS-232 connector on the A/V equipment or a PC
or other Serial Controller, see Section 4.1