Kramer Electronics RC-2C - Manual (Page 4)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
2
3 Overview
The RC-2C/RC-2 is a 1 Gang 2-button controller 1
Each button can be assigned with a trigger containing up to four actions for
RC-2 and up to eight actions for RC-2C.
with an RS-232 port, an IR
OUT port (for the RC-2C only) and two backlit and label capable buttons. It
sends an RS-232 command—with the push of a button—to a device (such as a
projector, display or switcher) via serial control protocols.
To achieve the best performance avoid interference from neighboring electrical
appliances and position your Kramer RC-2C/RC-2 away from moisture,
excessive sunlight and dust.
1 Available as a 1 Gang wall plate for the USA or a 1 Gang wall plate for Europe (in two sizes: 8.6cm and 8cm)