Figure 6: device selection – Kramer Electronics PL-18 User Manual
Page 19
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the P3K Wizard
16
4. After pressing OK on the Connect Window, the wizard searches the line for
connected devices. All detected devices are displayed in the device list box
under “Please select the device for update”:
Note: In the Device Properties section, you can update any of the active
fields that have a white background. After making any changes, click Set.
Figure 6: Device Selection
5. In the device list box, click to select the target device.
6. Next, select the firmware file to upgrade by clicking Browse next to the
Firmware file box.
The Open File window opens: