1 setting the vp-790 functions, 2 setting multiple units matrix, Figure 3: input screen – Kramer Electronics VP-790 User Manual
Page 6
4
VP-790 Blending Images - Setting the Basic System
2.1.1
Setting the VP-790 Functions
Set the
VP-790 functions via the OSD menu as follows:
•
Select Setup, Control Setup and then set the Menu Timeout to Infinite to turn
off the menu timeout
•
Select Output, then select Resolution to set the output resolution to the native
resolution of your projector to enable the
VP-790 to scale the image
Setting the output resolution to a resolution other than the native resolution would result
in the projector re-scaling the image!
•
Select Output, then select Aspect Ratio to fit the aspect ratio to the display’s
natural aspect ratio
•
Select Setup, Frame Lock and select Source
•
Select Output, Frame Rate and select Auto
2.1.2
Setting Multiple Units Matrix
Set both
VP-790 units as follows:
1. Select Input, Source and then Test Pattern.
Figure 3: Input Screen