Kramer Electronics VP-790 - Manual (Page 17)

VP-790 Blending Images – Setting the Black Level Compensation 15
Figure 15: The Black Level Uplift Menu
In this example of a 2x1 matrix, most of the list shown above is greyed out.
4. Select Non Blend Region.
This allows the black level in the non overlapped area to be raised to a dark
grey.
5. Adjust this level on both processors to match the level of grey in the over-
lapped area.
6. If you are left with a strip down each side of the center area, Go back to the
previous menu and select Reduce Black-Level Uplift Width.
Figure 16: The Reduce Black-Level Uplift Width Menu