Agilent Technologies Agilent RF Switch Driver Board U2121A-101 - Manual (Page 21)

U2121A-101 Operating Guide 11
A. Check your system
Prior to any installation or configuration, please ensure that your PC
meets the following minimum system requirements.
Hardware requirements
Software requirements
[1] Bundled with Agilent U2121A-Based RF Switch Driver Software installer.
[2] Obtained from Agilent Automation-Ready CD.
Hardware required Specification (minimum)
Processor 1.6 GHz Pentium® IV or higher
Operating System Windows® XP Professional or Home Edition (Service Pack
1 or later), or Windows® 2000 Professional (Service Pack
4 or later)
Video 1024×768 recommended
Browser Microsoft® Internet Explorer 5.01 or higher (6.0 or higher
recommended)
Available RAM 128 MB or higher (256 MB or higher recommended)
Hard Disk Space 1 GB required for installation
Software required Version (minimum)
Agilent VEE Pro Runtime Version 8.5
[1]
Agilent U2121 IVI Driver Version 1.0.9.0
[1]
Agilent IO Libraries Suite Version 15.0
[2]
or higher
Microsoft
®
.NET Framework Version 1.1 and 2.0
[1]
N O T E
Agilent IO Libraries Suite 15.0 is required if your PC is running on Microsoft
®
Windows Vista™ 32-bit operating system.
U2931A Operating Guide.book Page 11 Tuesday, June 10, 2008 10:17 AM