Kramer Electronics VS-84HN - Manual (Page 9)

6 VS-84HN - Overview
Figure 2: VS-84HN 8x4 HDMI Matrix Switcher Rear Panel
# Feature Function
13 OUT HDMI Connectors (1 to 4) Connect to up to 4 HDMI acceptors
14 IN HDMI Connectors (1 to 8) Connect to up to 8 HDMI sources
15 RS-232 9-pin D-sub Connector Connect to a PC/serial controller
16 ETHERNET RJ-45 Connector Connect to a PC via a LAN
17 ETH RESET Button Press to reset to the factory default IP parameters:
IP number

192.168.1.39
Mask – 255.255.255.0
Gateway – 192.168.1.1
Depress the button while powering on the device. The device powers up with the factory default IP parameters
18 REMOTE IR Opening
Connect to an external IR receiver for controlling the device via and IR remote controller (see Section 3.2 )
Covered by a cap. The 3.5mm jack at the end of the internal IR connection cable fits into this opening
19 Mains Power Connector Connect to the mains power
20 Mains Power Fuse Fuse for protecting the device
21 Mains Power Switch Switch for turning the device on or off
6
VS
-8
4
HN
–
Ov
e
rv
ie
w