Kramer Electronics VS-84H - Manual (Page 13)

Connecting the VS-84H 8x4 HDMI Matrix Switcher
KRAMER: SIMPLE CREATIVE TECHNOLOGY
10
6 Connecting the VS-84H 8x4 HDMI Matrix Switcher
To connect 1 the VS-84H 8x4 HDMI Matrix Switcher as illustrated in
the example in Figure 3 :
1. Connect up to eight 2 HDMI sources (for example, DVD players) to the
IN HDMI connectors.
2. Connect the four 3 OUT HDMI connectors to up to four HDMI
acceptors (for example, LCD displays with built-in speakers).
3. If required, connect a PC/controller to the RS-232 port (see
Section 7.4 ) and/or the Ethernet port (see Section 7.6 ).
4. Connect the device to the mains electricity (not shown in Figure 3 ).
5. If necessary, acquire the EDID (see Section 7.2 ).
Figure 3: Connecting the VS-84H 8x4 HDMI Matrix Switcher
1 Switch off the power on each device before connecting it to your VS-84H. After connecting your VS-84H, switch on its
power and then switch on the power on each device
2 You do not have to connect all the sources
3 You do not have to connect all the outputs