Kramer Electronics VS-169TP - Manual (Page 5)

Configuring the Ethernet Port
3
1.1 Setting a Virtual Port
If the control application cannot work with an Ethernet driver, use the Kramer
Virtual port driver as follows:
1. Insert the CD-ROM in the CD-ROM drive, double click the SetKVSP_xx.exe
1
file and follow the on-screen instructions 2 .
The virtual serial port is installed.
2. Run the Virtual Serial Port Manager Application.
The Virtual Serial Port Manager window appears (see Figure 2).
Figure 2: The Virtual Serial Port Manager Window
3. Press the Add VSP button to add a serial port and type the IP settings
according to the IP address and local port of your Kramer Machine 3 (see
Figure 3).
1 File names are liable to change from time to time
2 The latest version appears on our Web site at http://www.kramerelectronics.com
3 The factory default IP address is 192.168.1.39 and the factory default local port is 5000