Kramer Electronics VP-747T User Manual
Page 11
Installing in a Desktop
9
3. Insert the two mounting brackets through the bracket slits on both sides of
Figure 5: Inserting the Mounting Brackets through the Bracket Slits
4. Be sure that the upper outer rim is situated parallel to the edge of the desktop.
5. Screw the mounting butterfly screws until they reach the desktop surface
(from the underneath).
6. Tighten the locking butterfly screws to lock the mounting butterfly screws.
The VP-747T unit is now secured in place, as illustrated in
Figure 6: Securing the VP-747T into the Prepared Cut Out Opening