Kramer Electronics VP-747T - Manual (Page 10)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Installing in a Desktop
8
5 Installing in a Desktop
This section describes how to install the VP-747T in a desktop
1
To install the VP-747T in a desktop:
.
1. Cut an opening in the desktop—making the cut out on a wooden surface
using a sabre saw or a keyhole saw—at the location where you want to
insert the VP-747T.
Figure 3 illustrates the cut out template (not to scale)
defining the surface that you have to cut out to install your VP-747T.
Figure 3: Cut Out Dimensions
2. Carefully insert the VP-747T unit into the prepared cut out opening, as
illustrated in Figure 4 .
Figure 4: Inserting the VP-747T into the Prepared Cut Out Opening
1 Alternatively, you can use it freestanding on a table, or mounted in a 19” rack (see Section 6 )