Kramer Electronics VP-747 - Manual (Page 11)

VP-747 Control Software - Defining the Control Software 9
Menu Sub Menu 1 Sub Menu 2 Description
V-Zoom Vertical zoom: -8 to 8
Available when selecting Custom
aspect ratio
Custom Zoom Set the zoom: From 0 to 32 (this range
is equivalent to 100% to 400%)
This function is available after setting
the Zoom to custom
Zoom Set the Zoom: 100%, 150%, 200%,
225%, 250%, 275%, 300%, 325%,
350%, 375%, 400%, Custom
The zoom feature is disabled in cases
such as when the aspect ratio is set to
custom or when the PIP feature is on
Over Scan On, Off
Projector
Anywhere
Compensation Type Keystone, Anyplace, Rotation
Projector Location Front, Rear, Ceiling
Horizontal Keystone -40 to +40
Vertical Keystone -30 to +30
Pincushion/
Barrel Effects
-20 to +20
Rotation in Degrees -180 to +180
Diagonal Projection X, Y from all corners
Reset to Defaults Click to return to factory settings
PIP Frame On, Off
Color Red, Green, Blue
Display Set Mode 1 1400x1050x60, 1680x1050x60
Set Mode 2 1280x1024x75, 1280x1024x76
Set Mode 3 1280x768x60, 1366x768x60
Auto Image Manual, auto
HDCP Setting Select Follow Input or Follow Output to
define whether the HDCP will follow the
input or the output.
When Follow Input is selected, the
scaler changes its HDCP output setting
(for the HDMI output) according to the
HDCP of the input.
This option is recommended when the
HDMI scaler output is connected to a
splitter/switcher (in this mode, switching
may not be glitch-free).
When Follow Output is selected, the
scaler matches its HDCP output to the
HDCP setting of the HDMI acceptor to
which it is connected.
This ensures smooth switching,
regardless of the input
Low Latency
Mode
On, Off
About Gives details on the software version
number and Kramer Electronics