Kramer Electronics VP-730 - Manual (Page 25)

20 VP-730 - Presentation Switcher / Scaler Buttons
6.4 The Infrared Remote Control Transmitter
You can control the VP-730 remotely from the infrared remote control transmitter
which is powered by two AAA size 1.5V DC batteries. The IR remote control
transmitter has a range of up to 15 meters and delivers instantaneous results
The front panel U NIVERSAL I NPUT selector buttons I N 1 and I N 2 are
named Input 1 and Input 2, respectively, on the IR remote control
transmitter. Similarly, the front panel I
NPUT
selector buttons PC 1, PC 2,
PC 3 and PC 4, are named VGA 1, VGA 2, VGA 3 and VGA 4,
respectively, on the IR remote control transmitter.
Figure 12: IR Remote Control
Transmitter
Key Function
Freeze Pauses the output video and can be
programmed to mute the audio signal at the
same time (see Page 34 )
Blank Toggles between a blank screen (blue or
black) and the display
POWER Cycles power
Main
Source
9 keys for selecting one of the following
sources: Input 1, Input 2, VGA 1, VGA2,
VGA 3, VGA 4, HDMI 1, HDMI 2 and USB
Reset Press and hold to reset to the default
resolution (toggles between RESET TO XGA
and 720p)
Info Press to toggle the Info OSD menu
Capture Captures an image to place as a logo or
background (see Page 33 )
MENU Shows the main OSD Menu
Navigatio
n arrows
Allows maneuvering within an OSD screen
(left, right, up and down, as well as the
ENTER arrow at the center).
The + and - buttons increase and decrease
the volume level, respectively (when not in the
OSD menu)
Auto
Image
Press to assess the image and improve the
quality accordingly, by automatically
adjusting the phase, frequency and position
Save Press to save a profile
Recall Press to recall a profile
Picture Press to display the Picture OSD menu
PIP
source
9 keys for selecting one of the following PIP
sources: Input 1, Input 2, VGA 1, VGA2, VGA
3, VGA 4, HDMI 1, and HDMI 2
Mute Press to mute the audio signal
Swap Press to toggle between the PIP content and
the parent screen content
PIP Press to select the picture-in-picture (the PIP
button illuminates) see Page 16
i