Kramer Electronics VP-730 - Manual (Page 11)

Figure 1: VP-730 Presentation Switcher/Scaler Front Panel
# Feature Function
1 IR Receiver / LED Lights red when the unit accepts IR remote commands
2 UNIVERSAL INPUT
Selector Buttons
Press to select the composite video / s-Video / component video source and the appropriate audio source (from 1 to 2)
3
INPUT Selector
Buttons
(illuminate when
selected)
PC 1 Press to select the UXGA source 1 and the appropriate audio source (from 1 to 4)
4 HDMI 1 Press to select the HDMI source 1
5 HDMI 2 Press to select the HDMI source 2
6 USB Press to select the USB source (JPEG files on a USB memory stick) and also run/stop the slideshow (see Section 7.7.1 )
The front panel U
NIVERSAL
I
NPUT
selector buttons I
N
1 and I
N
2 are named Input 1 and Input 2, respectively, on the IR remote control
transmitter. Similarly, the front panel I NPUT selector buttons PC 1, PC 2, PC 3 and PC 4, are named VGA 1, VGA 2, VGA 3 and VGA
4, respectively, on the IR remote control transmitter (see Section 6.4 )
7 PIP Button Toggles the picture-in-picture function (see Section 6.2 )
8 BLANK Button Press to toggle between a blank screen (blue or black) and the display.
The BLANK button can be programmed to mute the audio signal at the same time (see Page 34 )
9 FREEZE Button Press to freeze/unfreeze the output video image, as well as pause the slideshow (see Page 31 ).
The FREEZE button can be programmed to mute the audio signal at the same time (see Page 34 )
10 MENU Button Press to display the OSD menu screen. Press again to return to normal operation.
11 ENTER Button Press to move to the next level in the OSD screen or to accept a new parameter
12
Button
Decreases the range by one step in the OSD screen or moves to the previous level in the OSD screen.
Decreases the volume level, when not in the OSD menu
13
Button
Moves up one step (in the same level) in the OSD screen, or moves to the previous slide when running a slideshow (see
Section 7.7.1 )
i
6
VP
-73
0 –
O
ve
rvi
ew