Kramer Electronics VP-441 - Manual (Page 20)

16 VP-441 - Controlling the VP-441
6.5 Controlling via the Infrared Remote Control Transmitter
You can control the VP-441 from the infrared remote control transmitter:
Figure 4: Infrared Remote Control
Transmitter
Keys Function
SIZE Set the size of the image
displayed
POWER Toggle the power save mode
ON or OFF
FREEZE Freeze/unfreeze the output
video image
BLANK Toggle between a blank screen
(blue or black screen) and the
display
MUTE Toggle between muting
(blocking out the sound) and
enabling the audio output
AV Select the composite video
input
YC Select the s-Video input
COMP1 Select the component video 1
input
COMP2 Select the component video 2
input
PC Select the UXGA input
HDMI1 Select the HDMI1 input
HDMI2 Select the HDMI2 input
XGA Reset Reset the resolution to XGA
720p Reset Reset the resolution to 720p
INFO Displays the selected input, the
input and output resolutions and
the firmware versions on the
OSD
NATIVE Select the output resolution via
the EDID of the connected
HDMI monitor
Four navigation keys
When not in the OSD, the left and
right arrows also control the output
volume
For embedded HDMI inputs, this
does not affect the embedded
output
OK Press to accept changes
Press also to auto adjust the
picture (see
Section 6.1.1 )
MENU Enter the OSD menu
EXIT EXIT the menu