Kramer Electronics TP-310A User Manual
Page 13
Configuring the TP-310A UXGA Line Receiver/DA
11
11
6.2 Connecting Additional TP-310A UXGA Line Receiver/DA Units
You can connect several TP-310A units via the LINE OUTPUT RJ-45
connectors on the first unit. The number of TP-310A units that can be
connected depends upon the quality of the input signal that you require and
the distance between the machines. We do not recommend cascading more
than five TP-310A units.
In the example illustrated in
, a TP-310A unit is connected to three
additional TP-310A units via the LINE OUTPUT RJ-45 connectors. Each
of the three connected TP-310A units can distribute the signal to 10
receivers. The system, in total, distributes the signal to 37 receivers.
To connect an expanded UXGA Line Receiver/DA system, do the
following:
1. Connect a transmitter to the LINE IN RJ-45 connector of the first TP-310A.
2. Connect the LINE OUTPUT 1 RJ-45 connector of the first TP-310A to the
LINE IN RJ-45 connector of the second TP-310A.
3. Connect the LINE OUTPUT 2 RJ-45 connector of the first TP-310A to the
LINE IN RJ-45 connector of the third TP-310A.
4. Connect the LINE OUTPUT 3 RJ-45 connector of the first TP-310A to the
LINE IN RJ-45 connector of the fourth TP-310A.
5. Connect the LINE OUTPUT RJ-45 connectors of each TP-310A unit, to
the LINE IN RJ-45 connectors of the appropriate receivers, as illustrated in
6. On each TP-310A unit, connect the power.