Kramer Electronics TP-114 - Manual (Page 4)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Getting Started
2
2.1 Getting Started
This quick start chart summarizes the basic setup and operation steps.
Step 2: Connect the power
Step 3: Change the polarity - see section 5
You can change the polarity of
decoding H and V Sync for video
(see Figure 4 and Table 2): You can change the polarity of
decoding H and V Sync for video
(see Figure 4 and Table 2):
On the TP-114, connect:
A computer graphics
source to the XGA input
The XGA output to a local
display
Up to 4 of the line
outputs to the line inputs
(for example, on TP-120
XGA Line Receivers), via
UTP cabling
On the TP-114, connect:
A computer graphics
source to the XGA input
The XGA output to a local
display
Up to 4 of the line
outputs to the line inputs
(for example, on TP-120
XGA Line Receivers), via
UTP cabling
XGA
Line
Receiver
ON
LE
VE
L
EQ.
XGA
Line
Receiver
ON
LE
VE
L
EQ
.
TP-114
1:4
XGA/HD
DA/CAT5
Transmitter
Display 4
Computer
Graphics
Source
TP-120
TP-120
TP-114
Long CAT 5 cable
Long CAT 5 cable
L
O 3 INE
UT
L
O INE
UT 4
Local
Display
Display 1
VGA
VGA
VGA
VGA
Step 1: Connect the inputs and outputs - see section 5