Kramer Electronics VS-202YC User Manual
Page 8
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VS-202YC 2x1:2 s-Video Switcher / DA
6
5 Connecting the VS-202YC 2x1:2 s-Video Switcher / DA
To connect
1
the
VS-202YC 2x1:2 s-Video Switcher / DA, as the example in
Figure 5 illustrates, do the following:
1. Connect the two s-Video sources to the s-Video INPUT 4p connectors (for
example, an s-Video player to INPUT 1 and an s-Video player to INPUT 2).
2. Connect the s-Video OUTPUT 4p connectors to the acceptors (for example,
an s-Video recorder to OUTPUT 1 and an s-Video recorder to OUTPUT 2).
3. If required, connect a PC to the RS-232 port
2
, see section 5.1.
4. Connect the 12V DC power adapter to the power socket
2
and connect the
adapter to the mains electricity.
Figure 5: Connecting the VS-202YC 2x1:2 s-Video Switcher
1 Switch OFF the power on each device before connecting it to your VS-202YC. After connecting your VS-202YC, switch on
its power and then switch on the power on each device
2 Not illustrated in Figure 5