Kramer Electronics VM-5S - Manual (Page 10)

Your Distributor
7
7
7
7
4.1 Your VM-2N Video Audio Distributor
Figure 1 and Table 1 define the VM-2N.
Figure 1: VM-2N Video Audio Distributor
Table 1: VM-2N Video Audio Distributor
# Feature Function
1 Illuminated Power Switch Illuminated switch for turning the unit ON or OFF
2 VIDEO IN BNC Connector Connects to the video source
3 VIDEO OUT BNC Connectors Connect to the video acceptor (from 1 to 2)
4 AUDIO IN RCA Connectors (L and R) Connect to the L and R channels of the audio source
5 AUDIO OUT RCA Connectors (L and R) Connect to the L and R channels of the audio acceptor
(from 1 to 2)
6 Power Connector with Fuse AC connector for supplying power to the unit
7 LEVEL Control (underside) Adjust
1
8
the audio signal output level
EQ. Control (underside) Adjust the cable compensation equalization level
1 Insert a small screwdriver into the hole and carefully rotate it to trim the level