Kramer Electronics PT-102SN User Manual
Page 9
Connecting the 1:2 Distribution Amplifier
7
5.2 Connecting the PT-102SN 1:2 s-Video DA
To connect the
PT-102SN 1:2 Audio DA, as the example in Figure 4
illustrates, connect the following
1
:
1. Connect an s-Video source to the IN 4-pin connector (for example, an
s-Video player).
2. Connect the two OUT 4-pin connectors to up to two s-video acceptors
(for example, displays).
3. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity.
4. Adjust the C and Y gain level, if required.
Figure 4: Connecting the PT-102SN 1:2 s-Video DA
1 Switch OFF the power on each device before connecting it to your PT-102SN. After connecting your PT-102SN, switch on
its power and then switch on the power on each device