Kramer Electronics PT-102SN - Manual (Page 10)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the 1:2 Distribution Amplifier
8
5.3 Increasing the Number of Inputs/Outputs
When it is necessary to handle more than one input (that is, to be able to
select one of several inputs), you can increase the number of inputs by
connecting the output of another switcher to the input of the machine (for
example, connect the output of the Kramer 4x1S 4x1 s-Video Mechanical
Switcher 1 to the input of the PT-102SN, to create a 4x2 switcher, as
illustrated in Figure 5).
Figure 5: Increasing the Inputs
You can cascade the unit with other high quality distribution amplifiers to
distribute a source to more than two outputs (for example, connect each of the
outputs of the PT-102AN to the input of the Kramer 105A 1:5 Stereo Audio
Distribution Amplifier 1 , to create a 1:10 DA, as illustrated in Figure 6).
Figure 6: Increasing the Outputs
1 Refer to the separate user manual, which can be downloaded at http://www.kramerelectronics.com