Festo Интерфейс привода SPC-AIF - Manual (Page 19)

Festo SPC−AIF−INC 0406NH English 19
4.2 Connecting the measuring system
S
Connect the measuring system cable of the drive with
the m
easuring system connection of the axis interface.
Please note
Connect only the original measuring system. Use only
the original cable. Do not extend the cable. Use the
short cable length to avoid interference from electroĆ
magnetic sources.
Pin Designation Pin assignment
1 5 V sensor supply 7
1 6
2 GND
1 6
3 Signal sinus +
5 8
4 Signal sinus −
4 2
5 Signal cosinus −
4
3
2
6 Signal cosinus +
7 Screening
8 n. c.