Festo Интерфейс привода SPC-AIF - Manual (Page 16)

Festo SPC−AIF−INC 0406NH English 16
4 Installation
Warning
Interference due to electromagnetic sources is liable to
cause sudden compensatory movements of the axis.
Follow the installation procedure below in order to preĆ
vent this electromagnetic interference.
ć Connect the earth connection on the left−hand side of
the housing with low impedance (short cable with
large cross−sectional area) to the earth potential, if the
axis interface is not attached to an earthed machinery
frame.
ć Connect the earth connection of the drive with low
impedance (short cable with large cross−sectional
area) to the earth potential.
1
Earthing connection
2
Standard cylinder
type DNCI with inteĆ
grated measuring
system
1
2
ММ
ММ
ММ
1