Chemglass CLS-1440-100 User Manual
Page 5

Page 5
c. Ensure DC power supply cord is fully inserted into 24VDC receptacle on rear
panel.
2.
Unit turns on but there‟s no rotation:
a. Verify drive coupling and motor shaft are secure
b. Check coupling pin located on overhead drive adapter.
3. Contact CGLS for additional troubleshooting assistance.
Replacement of Mains Fuse
– Using a small flathead screwdriver, depress slightly and
turn the black fuse holder cap counterclockwise on the rear panel. The fuse holder cap will
pop free exposing the fuse. Replace the defective fuse with one of equal rating [(1
Amp/250V) (5x20mm)]. Replace the fuse holder cap by inserting into the fuse holder base,
depressing slightly and turning clockwise.
CGLS warrants to the original purchaser, its products to be free from defects in
materials and workmanship for a period of one (1) year from the date of shipment, unless
otherwise specified. Our obligation under this warranty is limited to, at our option, repair,
replace, or cause any necessary repairs to be made to, any defective part or parts, which shall
be returned to us. CGLS takes no responsibility for damage to merchandise in transit. All
such claims must be submitted to the carrier. This warranty shall not apply to any equipment or
parts which shall have been repaired or altered outside our factory, or subjected to misuse,
negligence, accidents, faulty installation by other parties, or unauthorized repairs or
modifications. In addition, CGLS, shall not be responsible to the original purchaser or any other
party or parties for bodily or property loss, damages, or injuries of any kind or nature through
either direct or indirect use of the product. This warranty is made expressly in lieu of any and
all other warranties, expressed or implied, or statutory as to the merchantability, fitness for
purpose sold, description, quality, productiveness or any other matter. All other such
warranties are specifically excluded.
SHIPMENTS
All items are shipped F.O.B. Vineland, New Jersey with the charges prepaid and added to the
invoice. Special shipping instructions should accompany your order. We will select the best
method if none is specified. Air shipments are available for an additional charge. Delivery of
large products shall
be to the customer‟s loading dock. It is the customer’s responsibility to
arrange movement from the loading dock to the site of use, unless otherwise agreed to
by CGLS. Products requiring special or crating may incur additional handling fees.
CGLS takes every reasonable precaution to ensure that its products arrive without damage.
However, occasionally damage will occur during the shipment of a product. For this reason, it
is imperative that Purchaser examine each product immediately upon receipt in order to
determine whether the product, has arrived in proper condition. In the event Purchaser detects
any damage to the product, Purchaser shall immediately notify CGLS and the carrier who
delivered the product. Failure to notify CGLS and the carrier of any damage within five (5)
days of receipt of the product shall constitute a waiver of any claim for damage to the
product. The freight carrier shall be exclusively responsible for any damage which occurs
during shipment.
CGLS WARRANTY AND LIMITATION OF LIABILITY