Muxlab VGA 4x1 Switcher - Manual (Page 4)

© MuxLab Inc. VGA 4x1 Switcher Installation Guide
Page 4
1.
Overview
1.1. Description
The VGA 4x1 Switcher allows the user to select any one
of up to four (4) VGA (RGBHV) sources for one (1)
display via Cat 5e/6 cables for more cost-efficient
cabling. The Switcher works in conjunction with the
following MuxLab products:
500140: Active VGA Balun II Kit (Tx & Rx)
500141: Active VGA Balun II, Tx, no PSU
500142: Active VGA Balun II, Rx, no PSU
500144: Power Supply for 500141 and 500142
500150/500151: VGA 1x4 Distribution Hub
At least one (1) Kit is required to support one (1) source.
The Kit includes one (1) Transmitter and one (1)
Receiver. Up to three (3) additional Transmitters may be
added to support up to three (3) additional sources. The
500144 may be needed for each the 500141 and the
500142 for extended distance.