Appendix, A. ascii command set – Muxlab VGA 4x1 Switcher User Manual
Page 26
© MuxLab Inc.
VGA 4x1 Switcher Installation Guide
Page 26
5.
Appendix
A. ASCII Command Set
Ensure that the terminal emulation program parameters
are set to the following:
BAUD Rate:
9600
Data bits:
8
Stop bits:
1
Parity:
None
Flow control:
None
It should be noted that commands are case sensitive and
arguments must be separated by a single space.
Characters that are not supported will be rejected by the
response: ILLEGAL CHARACTER. Commands must
be entered in the following way and ended with a
carriage return:
version
Description:
Returns firmware version
Example: version
Arguments:
[none]
Response:
Version X.X.X
Example:
Version 1.0.0