Avaya 5410 - Manual (Page 20)

5410/2410 Phone User Guide Page 20
IP Office Issue 3f (7th October 2005)
Changing Options
Changing Ringer Options
The IP Office uses 'distinctive ringing' for different types of calls - a repeated single ring for internal calls,
a repeated double ring for external calls and a single ring followed by two short rings for ringback calls.
These options are fixed by the IP Office. The phone's own menus allow its ringer sound to be
personalized so you can recognize it from other ringing phones.
To change the ringer sound:
You can choose from among eight different ring sounds. This alters the tone and style of ringing used by
the phone, the ring pattern is still controlled by the IP Office according to the call type. Note: If you
receive a call while selecting a ringer sound, you are automatically returned to the call handling screen.
1. Press Exit to exit any other mode, then press any of the keys below the display.
2. Press Option.
3. Press Ring Options followed by Ring Pattern. A menu with the current ring pattern
appears.
4. To select a ringing pattern use either the and keys or press a dial pad key between 1 and 8.
You will hear the selected ringing pattern.
5. To hear the ringing pattern again press Play or repress the dial pad key.
• When you have selected a ringing pattern, press Save. You will hear a confirmation
tone and be returned to the options menu.
• If you want to return to the options menu without changing the ring pattern, press
Cancel.
To use the Message Lamp for ringing alerts:
1. Press Exit to exit any other mode, then press any of the keys below the display.
2. Press Option.
3. Press Ring Options and set Flash Message Lamp to Yes or No. When set to Yes the
Message lamp will flash when you receive a call.
• Changing this option does not affect the voicemail visual indicator feature.
To automatically show the call handling screen:
1. Press Exit to exit any other mode, then press any of the keys below the display.
2. Press Option.
3. Press Ring Options and set Show Phone Screen to Yes or No. If set to Yes then, when
you are setting up/using Speed Dial, Call Log, etc, you are automatically returned to the call
handling screen when you receive a call.