Comfort-Aire VFH 24 CA - Manual (Page 16)

VFH InverterFlex ® - Ceiling Cassette Heat Controller
14
6. To remove the corner cover panels, simply reach inside the circular indentation and pull outward to
toward the corner in the direction of the arrow shown below.
• The cover is attached with magnets, so no heavy force is required to remove the corner covers.
• Each corner cover is secured with a cable, so that it will not fall once it is removed.
7. With the cover removed from each corner, a leveling screw will be exposed. Simply tighten the screw to
raise the panel on each corner. Note: There is a small arrow stamped into the bracket to signify which
screw to tighten.
ATTENTION: The corner cover panels can be removed to
also provide access to the threaded rod.
8. As the panel is being screwed in, ensure that it remains level on all sides.
9. The insulation material of the ceiling cassette panel will compress to create a tight seal.
10. Replace the corner cover panels on all four corners.