Rugged Ridge Summer Brief Header, Black Denim, 97-06 Jeep Wrangler - Manual (Page 2)

Part 935XX – 13581.XX Page 2 of 3 3/01
3. Place the Island Topper (Roll Bar Top) on top of Jeep.
Insert front edge into the Windshield Channel, working
from one side of vehicle to the other (Figure 3).
4. Locate the Velcro straps on each side of the roll bar.
Wrap the flaps around roll bar and fasten (Figure 4).
Do both driver and passenger sides of the vehicle.
NOTE: The rear straps can be fastened in two different methods:
Option 1 shows how to attach the Island Topper to your vehicle using J-Clips.
Option 2 shows how to attach the Island Topper to your vehicle around the rear shoulder seat belts.
Option 1 (with J-Clip)
5. Feed the rear corner straps through the J-Clips (Figure 5) and place the J-Clip under a convenient
attachment point, such as a rear corner rail or floor loop (Figure 6).
Figure 5 Figure 6
Figure 4
Figure 3