Rugged Ridge Roll Bar Top, Black Denim, 76-86 Jeep CJ7 and 87-91 Wrangler (YJ) - Manual (Page 3)

13554.xx Page 3 of 4
04/16/07
8) Pull the Roll Bar Top towards the front of the Jeep and lay over windshie ld channel
(Figure 6).
9) Fold the plastic strip under and insert into windshield channel (Figure 7 & 8). Center
the Roll Bar Top in the channel by pulling from either side as necessary.
10) Loosely wrap the Velcro straps around the roll bar (Figure 9).
11) Pull the Roll Bar Top towards the rear of the Jeep and over the Bow Assembly.
12) Insert the two Long straps through the J-Hooks and thread through the Buckle pulling
them tight (Figure 10).
Figure 6
Figure 9 Figure 10
ROLL BAR TOP
WINDSHIELD FRAME
WINDSHIELD
CHANNEL
Figure 7 Figure 8