Rugged Ridge Roll Bar Top, Black Denim, 76-86 Jeep CJ7 and 87-91 Wrangler (YJ) - Manual (Page 2)

13554.xx Page 2 of 4
04/16/07
3) Repeat Step 2 for opposite side.
4) Attach the Straight Bar to the Curved Bars using the two Sheet Metal Screws provided
(Figure 2).
5) Using the two Headless Screws provided attach the Plastic Feet to the Curved Bars
(Figure 3).
6) Once the Bow Assembly is complete, slide it trough the Nylon Loops located on each
rear corner of the Roll Bar Top (Figure 4).
7) Attach the Bow Assembly to the Plastic Bracket (attached to the roll bar in Steps 2 and
3) using the two Large Bolts provided (Figure 5). NOTE: Make sure the Snap on the
Straight Bar is facing the outside of the Jeep.
Figure 2 Figure 3
Figure 4
Figure 5