Front installation – Rugged Ridge 4-Inch Lift Kit with Shocks, 07-14 Jeep Wrangler (JK) User Manual
Page 2
Pg 2
Photo #2
Photo #3
Photo #1
Front Installation
:
1. Park the vehicle on flat, level ground and set emergency
brake.
2. Raise the front of the vehicle and support frame rails using jack
stands.
3. Disconnect the front sway bar end links using a 18mm socket.
Disconnect front track bar using a 21mm socket.
(See Photo #1)
4. If installing Rugged Ridge Steering Stabilizer Part# 18475.03,
Remove factory steering stabilizer using 18mm socket. (See
Photo #2)
5. Disconnect front shocks using a 18mm socket. Remove front
tires/wheels and remove front coils. (See Photo #3) Remove
front Shocks.Mark driveshaft & yoke then remove.
6. Locate new Rugged Ridge front bump stop. Place bump stop
on the center of the bump stop pad located on the front axle.
Mark and drill using a 25/64" drill bit. (See Photo #4).
7. Place bump stop in coil spring, and install coil spring. Attach
bump stop to axle using the 3/8 X 4" button head bolts with
one washer under the nut. (See Photo #5)
Photo #4
Photo #5
- HD Steering Box Mount, 76-86 Jeep CJ Models (4 pages)
- Manual Locking Hub Set, 86.5-93 Nissan Frontier, Pathfinder, & Xterras (1 page)
- Manual Locking Hub Conversion Kit, 90-97 Ford, Mazda SUV & Pickup (2 pages)
- AMC20 Heavy Duty Differential Cover (1 page)
- Dana 44 Heavy Duty Differential Cover (1 page)
- Differential Skid Plate, Dana 30 (1 page)
- Differential Skid Plate, Dana 44 (1 page)
- Heavy Duty Steering Box Brace, 84-01 Jeep Cherokee (XJ) (3 pages)
- Differential Skid Plate, Jeep logo, Dana 44 (1 page)
- Dana 30 Heavy Duty Differential Cover (1 page)
- Dana 35 Heavy Duty Differential Cover (1 page)
- Differential Skid Plate, Dana 35 (1 page)
- Manual Locking Hub Set, 86-93 Nissan Pathfinder & Pickup (1 page)
- Manual Locking Hub Set, 90-94 Nissan Patrol (1 page)
- Heavy Duty Steering Box Brace, 76-86 Jeep CJ Models (3 pages)
- Differential Skid Plate, Jeep logo, Dana 30 (1 page)
- Dana 60 Heavy Duty Differential Cover (1 page)
- Differential Skid Plate, Jeep logo, Dana 35 (1 page)
- Tail Light Euro Guards, Black, 07-14 Jeep Wrangler (3 pages)
- Headlight Euro Guards, Black, 07-14 Jeep Wrangler (3 pages)
- RRC Side Armor Guards, 07-14 Jeep Wrangler Unlimited (JK) (1 page)
- Euro Style Turn Signal & Side Marker Guard,07-14 Jeep Wrangler (JK) (3 pages)
- RRC Side Armor Guards, 07-14 Jeep Wrangler (JK) (1 page)
- RRC Rocker Guards, Black, 07-14 Jeep Wrangler Unlimited (JK) (1 page)
- 3-Inch Round Tube Steps, Black, 07-14 Jeep Wrangler Unlimited (JK) (2 pages)
- 4 1/4-inch Oval Tube Side Steps, Black, 07-14 Wrangler Unlimited (JK) (2 pages)
- Steering Component Skid Plate, 07-14 Jeep Wrangler (JK) (2 pages)
- Rear Corner Guards, Body Armor, 97-06 Jeep Wrangler (2 pages)
- Rocker Side Panels, Body Armor, 97-06 Jeep Wrangler (TJ) (2 pages)
- Front Fender Guards, Body Armor, 97-06 Jeep Wrangler (2 pages)
- Corner Guards, Body Armor, 07-14 Jeep 4-Door Wrangler (JK) (2 pages)
- Hood Guard, Body Armor, 07-14 Jeep Wrangler (1 page)
- Tail Light Euro Guards, 07-14 Jeep Wrangler (JK) (3 pages)
- Euro Guard, Turn Signal, Black, 07-14 Jeep Wrangler (1 page)
- RRC Side Armor Guards, 87-06 Jeep Wrangler (1 page)
- RRC Rocker Guards, Black, 07-14 Jeep Wrangler (JK) (1 page)
- 3-Inch Round Side Steps, Black, 07-14 Jeep 2-Door Wrangler (JK) (2 pages)
- 4 1/4-inch Oval Tube Side Steps, Black, 07-14 Jeep Wrangler (JK) (2 pages)
- 6-Piece Body Armor Kit, 97-06 Jeep Wrangler (TJ) (10 pages)
- Rear Corner Guards, Body Armor, 97-06 Jeep Wrangler (TJ) (2 pages)
- Corner Guards, Body Armor, 07-14 Jeep 2-Door Wrangler (JK) (2 pages)
- Side Marker Light Euro Guards, Black, 07-14 Jeep Wrangler (2 pages)
- Fog Light Euro Guards, Black, 07-14 Jeep Wrangler (2 pages)
- 3-Inch Round Tube Side Steps, Black, 97-06 Jeep Wrangler (TJ) (2 pages)
- Gas Tank Skid Plate, 97-06 Jeep Wrangler (TJ) (3 pages)