Rugged Ridge Front Headrest Grab Handles, Red, 07-14 Jeep Wrangler - Manual (Page 2)

Installation instructions for 13305.12 & 13305.13 (Dual center handle)
Step1 – Unscrew the two bolts located on either side of the center dome
light. A 10mm socket will be required. (Fig.3)
Step2 – Insert bolts through grommets of dual grab handle and reinstall
bolts. Tighten securely. (Fig.4) Repeat for other side.
Fig.3 Fig.4
Installation instructions for 13305.14 & 13305.15
(Front Windshield & Rear side grab handle)
Step1 – Unscrew the two bolts located one either rear sides of roll bar.
(Fig.5) A 10mm socket will be required.
Step2 – Insert bolts through grab handles grommets and reinstall the bolts.
Tighten securely. (Fig.6) Repeat for other side.
Fig.5 (Supplied washers are not needed) Fig.6
Pg.2