beautypg.com

Rugged Ridge Upper Door Kit, Rear, Black, 07-14 Jeep 4-Door Wrangler (JK) User Manual

Page 3

background image

Page 3 of 6

7. With door closed a 1/8” gap should be visible at top corners (Pic. 10). If there is more or less than a 1/8” gap

at top corners further adjustment will be needed.

8. To adjust corners up place palm of hand on top corner of upper door. Push up slightly to raise frame

(Pic. 11).

9. To adjust down place palm on top corner of upper door. Tap down to lower frame (Pic. 12)

Pic. 10

Pic. 11

Pic. 12

10. With upper door centered and a 1/8” gap at top corners tighten collar set screws with supplied allen

wrench (Pic. 13). Do not over tighten.
11. Pull and reposition Velcro to lower door (Pic. 14). Inspect side corners, and top of upper door for tight seal to

door frame (Pic. 15). From inside vehicle look at upper door and inspect for visible light. If light is visible then

further adjustment will be needed.

Pic. 13

Pic. 14

Pic. 15

12. Pictures 16, 17, and 18 show how upper door frames should look installed. If light can be seen from inside

vehicle follow instructions on page 4 explaining how to obtain a proper seal to vehicle door frame.

Pic. 16

Pic. 17

Pic. 18