Rugged Ridge Hood Lift Kit, 72-06 Jeep CJ & Wrangler - Manual (Page 3)

11252.50
72-06 CJ, YJ, TJ, LJ HOOD LIFT
Page 3 of 3
GRINDING THIS WEB MAY
BE NECESSARY TO AVOID
INTERFERENCE
6. Make sure all hardware is tightened. Slowly lower hood while
looking underneath to make sure no interference occurs. There may be
a clearance issue in TJ/LJ models with the washer fluid reservoir. This can
usually be fixed by grinding down the web between the cap and the hump
in the reservoir.
7. Installation is now complete. No more annoying prop rod in the
way when working under the hood!
5. Insert ball stud in one of the six holes on the plate welded to the
lower rod installed in step 2. Using the bottom hole will provide maximum
lift while using the top hole will provide minimum lift. Be sure to use the
same hole for each ball stud. Clip gas strut onto the mounted ball studs.
Clip the body of the gas strut to the upper ball stud as shown.
OMIX-ADA® LIMITED WARRANTY
Your Omix-Ada® product is covered by the Limited Warranty explained below that gives you specific legal rights This limited warranty is the only warranty Omix-Ada® makes in connection with your product purchase Parts sold by
Omix-Ada® but supplied by other vendors are exclusively warranted by the vendor supplying the part Omix-Ada® neither assumes nor authorizes any vendor, retailer or other person or entity to assume for it any other obligation or
liability in connection with this product or limited warranty
What is covered? Subject to the terms, exclusions and limitations herein and with respect only to products first sold in the United States, Omix-Ada® warrants to the initial retail purchaser only that its branded parts (including Rugged
Ridge™ and Outland™ products) shall be free of defects in material and workmanship for a period of six (6) months or 6000 miles from date of initial purchase Your warrantor for these parts is Omix-Ada®, Inc , 460 Horizon Dr , Suite
400 Suwanee, GA 30024 Omix-Ada® reserves the right to require proof of purchase as a condition of this Limited Warranty
What is not covered. Your Omix-Ada® limited warranty does not cover electrical components or body parts which are sold “AS IS” due to possible damage through installation or shipping Your Omix-Ada® limited warranty further
does not cover products or parts supplied to Omix-Ada® by outside vendors or products, parts or vehicles Omix-Ada® determines to have been damaged by or subjected to:
•
Installation damage, alteration, modification or failure to maintain
• Normal wear and tear (bushings, tie-rod ends, etc ) Scratches or defects in product finishes (powder coating, plating, etc ) or damage due to shipping
•
Damage arising or related to non- Omix-Ada® parts, including but not limited to any vehicle’s electronic stability system, related components or other vehicle systems
•
Racing or other vehicle competitions or contests Accidents, impact by rocks, trees, obstacles or other aspects of the environment
•
Theft, vandalism or other intentional damage
Remedy Limited to Repair / Replacement The exclusive remedy provided hereunder shall, upon Omix-Ada® inspection and at Omix-Ada®’s option, be either repair or replacement of product or parts covered under this Limited
Warranty Customers requesting warranty consideration on Omix-Ada® branded parts (including Rugged Ridge™ and Outland™) should first contact the independent distributor from whom you purchased your part to obtain a Returned
Goods Authorization number All removal, shipping and installation costs are customer’s responsibility Customers requesting warranty consideration on non-Omix-Ada® branded parts should refer to the manufacturers’ Limited Warranty
and contact them directly If a replacement part is needed before the Omix-Ada® part can be returned, you must first purchase the replacement part Then, if Omix-Ada® deems the part warrantable, you will be credited the purchase
price
Other Limitations - Exclusion of Damages - Your Rights Under State Law
•
In consideration of the purchase price paid, neither Omix-Ada® nor any independent Omix-Ada® distributor/licensee are responsible for any time loss, rental costs, or for any incidental, consequential, punitive or other
damages you may have or incur in connection with any part or product purchased Your exclusive remedy hereunder for covered parts is repair/replacement as described above.
•
This Limited Warranty gives you specific rights You may also have other rights that vary from state to state For example, While all implied warranties are disclaimed herein, any implied warranty required by law is
limited to the terms of our Limited Lifetime Warranty as described above Some states do not allow limitations of how long an implied warranty lasts and /or do not allow the exclusion or limitation of incidental or
consequential damage, so the limitations and exclusions herein may not apply to you.
©Omix-Ada, Inc 3 1 08 All Rights Reserved